Overview
This guide shows you how to set up your chemicals in Washstacks on a computer (the web application) and how to keep track of how much of each chemical you have. You will do things in this order:
Add your vendors (the companies you buy chemicals from).
Add your chemicals (one time for each chemical you use).
Enter your inventory (how many gallons you have at each location).
Update your inventory every time you do a count (daily or weekly).
Check the report to see every change that was made.
Steps 1 and 2 are set-up steps. You only do them once, or when you get a new vendor or a new chemical. Steps 4 and 5 are things you will do again and again.
Why order matters: A chemical needs a vendor to pick from, and inventory needs a chemical to count. So always go vendors first, then chemicals, then inventory.
Part 1: Get to the Chemicals page
Every task in this guide starts on the Chemicals page. Here is how to get there.
Log in to Washstacks. You will land on your Dashboard. It says "Hi, [your name]" at the top.
Look at the menu on the left side of the screen. This is called the navigation pane.
Click Operations. A list of smaller options will drop down under it.
Click Chemicals. It is the third option under Operations, right below Checklists.
You are now on the Chemicals page.
Part 2: Add your vendors
A vendor is any company you buy chemicals from. Add all of them first, so you can pick them when you add your chemicals.
On the Chemicals page, look at the top right corner. You will see a blue + ADD button and, right next to it, 3 dots stacked on top of each other.
Click the 3 dots. A small black menu pops up.
Click Vendors.
On the Vendors page, add a vendor and type in its information.
Save it.
Do steps 4 and 5 again for every company you get chemicals from.
Tip: Not sure who all your vendors are? Look at your last few chemical invoices. Every company name on them should be added here.
Part 3: Add your chemicals
Now you will create each chemical you use. You only do this once per chemical.
Go back to the main Chemicals page (click Chemicals in the left menu, or click Go back in the top right corner).
Click the blue + ADD button in the top right corner. A form opens.
Fill in the form. Put in as much information as you have:
Chemical Name (required): the name of the chemical, for example TRI FOAM BLUE or PRESOAK HI PH.
Cost per Unit (required): what you pay for one unit (one gallon) of this chemical.
Vendor: start typing the vendor's name, then click it in the list. This is why you added vendors first.
Description: any notes that help your team, like what the chemical is used for.
Locations: click the box that says Select options and pick every location that has this chemical. (See the important note below.)
Application Settings (optional): if you know them, fill in Dilution Setting, Injector Size, Nozzle Size and Air Pressure.
Click the blue SAVE button at the bottom. The button stays light blue and won't work until the required boxes are filled in.
Do steps 2 to 4 again for every chemical you use.
Important — pick every location: When you choose Locations, pick every place this chemical could ever be. That includes your warehouse or inventory-only locations, not just your wash sites. If you skip a location, you will not be able to enter inventory for that chemical there.
When you are done, all of your chemicals are created.
Part 4: Enter your inventory
Inventory is how much of each chemical you have right now, counted in gallons. You enter it one location at a time.
Go to the main Chemicals page (Operations → Chemicals).
Near the top of the page, click the location dropdown box. At first it says All locations.
Pick the location you want. You can scroll the list, or type the name in the Search... box to find it fast.
The page now shows only that location's name in the box (for example, Waves-HQ) and a list of the chemicals at that location.
Look at the INVENTORY column on the right side. Each chemical has a number there (it starts at 0.00).
Click inside the inventory box for a chemical and type how many gallons you have.
Do step 6 for every chemical on the list.
Now switch to your next location. Click the X in the location box to clear it, then pick the next location from the dropdown.
Repeat steps 5 to 8 until you have entered inventory at every location, including warehouse locations.
Don't see a chemical at a location? That means the location wasn't picked when the chemical was added. Go back to Part 3, open that chemical, and add the location.
Part 5: Update your inventory (daily or weekly counts)
The same inventory boxes from Part 4 are where you make every adjustment from now on. Whether you count daily or weekly, the steps are the same.
Go out and count how many gallons of each chemical you have at the location.
In Washstacks, go to Operations → Chemicals.
Pick that location from the location dropdown.
Click inside the inventory box for each chemical and type the new number of gallons you counted.
Do this for every chemical you counted.
Switch locations and repeat if you counted more than one location.
Washstacks remembers every change: who made it, when, and how much the number went up or down. You can see all of this in the report in Part 6.
Tip: Type the total you counted, not the amount you used. For example, if you had 22 gallons and now count 19, type 19. Washstacks works out the change (-3) for you.
Part 6: See your inventory changes in the report
The Chemicals report shows every inventory change at any location, for any dates you choose.
Click Reports in the left menu.
Open the Chemicals report.
Use the three FILTER BY boxes at the top to narrow it down:
Locations: pick one location, or leave it on All locations.
Dates: pick the date range you want to see, or leave it on All Dates.
Chemicals: pick one chemical, or leave it on All Chemicals.
Read the list. Each row is one change, and the newest changes are at the top.
Column | What it tells you |
DATE | The day and time the change was made |
UPDATED BY | The person who made the change |
CHEMICAL | Which chemical was changed |
STOCK | How many gallons there were after the change |
CHANGE | How much the number went up (+) or down (-) |
For example, a row showing PRESOAK HI PH with STOCK 19 and CHANGE -1 means someone counted 19 gallons, which was 1 gallon less than the last count.
Quick checklist
All vendors added (3 dots → Vendors)
Every chemical added with name, cost per unit and vendor (+ ADD)
Every location picked for each chemical, including warehouse locations
Starting inventory entered at every location
A daily or weekly count schedule set for your team
Chemicals report checked to make sure the numbers look right
Tips
Always enter inventory in gallons.
Use the Search... box in the location dropdown if you have lots of locations.
If two chemicals have the same name (like two TRI FOAM RED rows), add a note in the Description so your team knows which is which.
Need to count from the wash floor? See the companion article, Chemicals Training: Mobile App.